Palm Oil for Biodiesel
This Machine makes bio-oil into biodiesel,whicn is novel green fuel used for chemical industry field.Bio-oil can be plant oil,
animal oil or high acid value waste oil.
This set of biodiesel equipment contains the international advanced pre-processing section,esterification process and distillation process,and it meets the European Union Standards.We have obtained patent which patent No. is ZL200920089138.8.
1.Preprocessing section of bio-oil: when heated to 65~70Â°c,bio-oil is leached to remove impurities.
2.Drying section:bio-oil without impurities is dehydrated and dried.
3.First esterification reaction:adding bio-oil dehydrated to methanol including 3% sulfuric acid,first esterification reaction starts,
and it will take 1.5~2.5 hours.
4.Second esterification reaction:this esterification reaction will take 9~12 hours.
5.Vacuum drying section: Second esterification reactants are dried with vacuum,removing moisture,reducing water content
6.Distillation section: with vacuum state,section esterification reactants after vacuum drying section are heated to 220Â°c,
biodiesel forLD by steaming.Then cooling biodiesel to be liquid ,the liquid biodiesel is just finished biodiesel.
7.Methanol fine-distillation:after biodiesel is isolated,the remaining methanol liquid is distilled to form methanol.Cooled
methanol can be reused.
1.Stable process performance
3.Small investment of equipment
4.High conversion rate(up to 85%)
Featurers biodiesel processing line
1.Good driving performance for low-temperature motor,cooling point can reach -10Â°c without adding agent;
2.Good lubrication performance ensures low wearing rate of oil spraying pump,engine tank and rods;
3.As flash point of biodiesel is higher than mineral diesel,biodiesel does not belong to dangerous goods;
4.Sulfur content is low,small emission;
5.low residual combustion char(0.02%),i.e. microparticles content of waste gags is low;
6.Damage of waste gas after combustion is lower than that of mineral diesel;
7.High biodecomposition rate is favorable for environment protection.
Advanced Process Waste Oil to Diesel Machine 10-100TPD produced and supplied by shandong leader machinery Co.,Ltd.
Main spare parts of Advanced Process Waste Oil to Diesel Machine 10-100TPD : worm, squeezing head, worm shaft, cage bar, heater ring, cake outlet, vacuum filter .
Main Features & advantages of Soybean Oil Plant
1. Advanced Process Waste Oil to Diesel Machine 10-100TPD is High oil yield, low oil residual in cake. The oil left in cake is less than 6% ; Cake thickness can be adjusted while machine stops running;
2. Advanced Process Waste Oil to Diesel Machine 10-100TPD is Small-land using: only 10-20 square meters workshop can make production.
3. Soybean Oil Plant is Pure oil quality: machine surface is made of chrome plated stainless steel, in line with food hygiene standards; Besides, with two vacuum oil filters, residual can be removed by simple filtering;
4. Advanced Process Waste Oil to Diesel Machine 10-100TPD is Labor saving: it can save 60% labor for equal output and 40% labor cost per day, for one or two peopel are able to make production .
5. Environment friendly: integrating advantages of traditional Soybean Oil Plant, the new design machine are noiseless, no pollution, which can better meet environmental standard.
6. Other advantages of Soybean Oil Plant: high efficiency, enerLD and labor saving, easy operation, simple maintenience .