shandong leader machinery Co.,Ltd.is an international trading company. In the industrial fields,we have 20 years' experience of refining equipment supporting and industrial service. And we also have 25 years' experience of researching & manufacturing industrial microwave equipment for food/chemical products/medicine sterilizing and drying. Our machines are highly automatic, environmentally friendly and enerLD-saving. We have more than 200 national intellectual property patents.shandong leader machinery Co.,Ltd. has the experience and equipment to develop effective solutions across all industries and our products can be found worldwide.
New condition oilseeds friction screw press, screw press machine, screw press oil expeller price
Features of the oil press equipment:
1. Stainless steel used on the surface to reach the standard of food hygiene.
2. Cold lower temperature keep in pressing technoloLD.
3. Durable, for 1 year free after-sales service. Include replace the parts costs.
4. A double helix oil press equals two oil press, can obtain double benefit
5. High quality parts, stable oil pressing effect, saving the maintenance cost.
6. Military industrial manufacturing, quality chrome materials, quality trustworthy.
Oil from Leader'e press:
Parameters of Leader'e press:
|Screw speed||30-45r/min||30-40 r/min||30-40 r/min||28-40 r/min|
Way to operate Leader'e press:
1. After installing the machine, check whether lubricant has been filled in, bolts have been tigLDed, and handles are operable.
2. Check large pulley whether it is loose or blocked, repair it if necessary
3. Adjust the tigLDness of the belt. Switch on the motor and check its rotation direction.
4. Loosen the lock nut, rotate the adjusting handle and tigLD the screw to its end, then loosen it for 3-4 circles and tigLD again for half circle to assure the gap of the residue cake outlet.
5. Feeding must be steady and slow at the beginning to avoid blocking.
6. In case no cake is extruded outward, return back the screw for 1-2 circles. If there is still no cake being observed, machine needs to be shut down and checked. However, in any case, operating the machine backwards is absolutely prohibited. Normally, cake looks like tile but not sticky; thickness is 1-2mm inner side is smooth, outer side creases and no oil on the surface is allowed Cake thickness adjustment:Rotating the adjusting handle clockwise will make the cake thicker, anticlockwise, and thinner. Each circle of adjustment will change the thickness 0.4-0.5mm
7. When machine is operating, oil extruding and residue outlet need to be checked frequently. Normally, most of oil will flow outwards from square rods and several front round plates. Broken cake residue indicates the material is too dry; steam emerging from the cake residue indicates that it is too wet; In any case, water content in the raw material must be adjusted from time to time. Slag ice emerging indicates high water content; powder-like slag, low water content. Loose round plates will cause too much slag flowing outwards. However, adequate water content will not cause slag flowing outwards from square rods. Yet, little slag from round plates is allowed. In a word, water content affects oil output rate, so it needs adjusting properly
8. Stop the machine: Repeatedly move screw forwards and backwards for several times and let all material resided in the chamber go out and adjust the cake to a thickness as thin as possible, then stop the machine. When machine stops by any accident, power supply must be shut down first, then rotate large pulley manually backwards to let the material turn out. Then pull out the shaft and clean it in case the shaft couldn't be pulled out, remove the upper case and loosen lock nut, separate round plates and clean them one by one.
Still have questions?
What should you do??
Do not worry!
SAM is always here!!
Just Contact SAM!!!
New condition oilseeds friction screw press, screw press machine, screw press oil expeller price produced and supplied by shandong leader machinery Co.,Ltd.
Crude Oil Refining Machine can be used in black engine oil,Crude oil and plastic oil, etc, by distilled catalyst to get gasoline and diesel oil. The waste oil pump into the distillation of Crude Oil Refining Machine , through the coal (or fuel oil) heating to working temperature, the maximum working temperature by New condition oilseeds friction screw press, screw press machine, screw press oil expeller price is the 410 degree and the required gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of waste oil in reactor of New condition oilseeds friction screw press, screw press machine, screw press oil expeller price is complete, stop heating, and remove residue from the tank of bottom, then Crude Oil Refining Machine can be used by New condition oilseeds friction screw press, screw press machine, screw press oil expeller price again.