shandong leader machinery Co.,Ltd.is an international trading company. In the industrial fields,we have 20 years' experience of refining equipment supporting and industrial service. And we also have 25 years' experience of researching & manufacturing industrial microwave equipment for food/chemical products/medicine sterilizing and drying. Our machines are highly automatic, environmentally friendly and enerLD-saving. We have more than 200 national intellectual property patents.shandong leader machinery Co.,Ltd. has the experience and equipment to develop effective solutions across all industries and our products can be found worldwide.
Leader'e advanced camellia japonica seed oil press, machine to make cold pressed camellia oil
WHAT OILSEEDS ARE AVAILABLE??
WHAT WILL BE PRODUCT OIL LIKE?
WHAT IS THE PROCESSING LIKE?
WHAT IS PRESSING MACHINE LIKE?
WHAT IS THE OPERATION?
1. When the machines run freely normally, feed small amount of oilseeds uniformly slowly, so as to grind the machine chamber, checking whether itÃÂ¢ÃÂÃÂs normal or not when the cakes come out. If it canÃÂ¢ÃÂÃÂt be discharged smoothly, it may be the reason of too small gap, adjust hand wheel clockwise. If the cakes are discharged too much too fast, adjust hand wheel counterclockwise till it can work normally. Then increase the input capacity gradually, so as to avoid non-uniform feeding, loading rise suddenly, resulting in blockage.
2. The working temperature of press machine depends on the oilseeds variety and humidity. The higher machine temperature is needed if the input material is too dry, on the contrary, the temperature can be lower. Normally, the oil can be extracted out when the machine temperature is about 60ÃÂ¢ÃÂÃÂ. The normal production can be started when you can feel itÃÂ¢ÃÂÃÂs hot while you touch the machine body.
3. Adjust the meal thickness to 0.3mm~1.0mm, adjust nut and increase feeding capacity when it reaches requirement.
4. Check the cake discharging frequently during the production. Stop feeding when the cake canÃÂ¢ÃÂÃÂt be discharged smoothly or non-discharging.
5. Clean the slag leakage constantly so as to avoid blocking of oil-way. The recycled slag can be feed back to hopper and press again.
6. During the second pressing, the meal should be broken into 10mm or so pieces, and this can avoid disordered feeding. Normally, soybean is pressed 2 times, peanut and cottonseed can be pressed 2~3 times.
7. The machine should be stopped immediately and clean it, once the metal or other tough substances are found in the chamber.
8. Close the bottom spile in the feed inlet and stop feeding 1~2 minutes before stop the machine. Make screw go backward by 2~3 cycles, so the residues can be discharged.
BRIEF INTRDUCTION OF PRETREATMENT/PRESSING SECTION:
1. Cleaning process: Use vibration cleaning sieve and magnetic selector to get better cleaning effect. And This step is mainly to clean the big impurities, like the stone, big dust iron etc .
2. Crushing Process: This Process is mainly to crush the peanut, as the peanut is big, it is not easy to press. We must crush the peanut to 6-8 pieces.
3. Flaking Process: After crush and peel, we need to flake the crushed peanut, which make the cell wall of peanut broken. Then it is useful for the oil extracting.
4. Cooking Process: After the flaker, we need to cook the flaked peanut, control the moisture and the temperature.
5. Pre-pressing: After all the pretreatment , pre- press the peanut, the oil can be extracted about 76%.
WHAT CERTIFICATES DO Leader'E HAVE?
Still have questions?
What should you do??
Do not worry!
SAM is always here!!
Just knock me!!!
Leader'e advanced camellia japonica seed oil press, machine to make cold pressed camellia oil produced and supplied by shandong leader machinery Co.,Ltd.
Crude Oil Refining Machine can be used in black engine oil,Crude oil and plastic oil, etc, by distilled catalyst to get gasoline and diesel oil. The waste oil pump into the distillation of Crude Oil Refining Machine , through the coal (or fuel oil) heating to working temperature, the maximum working temperature by Leader'e advanced camellia japonica seed oil press, machine to make cold pressed camellia oil is the 410 degree and the required gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of waste oil in reactor of Leader'e advanced camellia japonica seed oil press, machine to make cold pressed camellia oil is complete, stop heating, and remove residue from the tank of bottom, then Crude Oil Refining Machine can be used by Leader'e advanced camellia japonica seed oil press, machine to make cold pressed camellia oil again.